![]() ![]() You can find instructions on doing this in the Raspberry Pi Getting started with the Camera Module documentation. If you are using a Raspberry Pi Camera module, insert the camera into the camera socket using the ribbon cable. When the write has completed, insert the SD card into your Pi. ⏱ This will take a few minutes, so you can work on the next goal whilst this is happening. Once you have configured these options, write the image to the SD card. □ If the WiFi you are using has a captive portal, or other restrictions beyond a simple SSID/password combination then you will need to install the full Raspberry Pi OS (not Lite) and connect your Pi to a keyboard/monitor/mouse to configure the WiFi. You will connect to the Pi via this hostname, so it will need to be unique - if other hackers sharing the same WiFi at this event have the same Pi name you won’t be able to log into your Pi by name and will need to connect via IP address, which adds complexity as you may need to connect your Pi to a keyboard/maouse/monitor to get this IP address. Set up the WiFi details on the Pi, ensure Enable SSH is set, set a password, and set a unique hostname. This setting dialog is launched by pressing Ctrl+Shift+x. □ If you have any issues with the hackathon WiFi, a popular fallback is to connect the Pi and one computer to a mobile hot-spot or tether to a phone.įollow the instructions in the Raspberry Pi Imager blog post to launch the advanced settings. The Pi will need to be on the same WiFi network as at least on team members computer. These need to be configured up front as you won’t be connecting your Pi to a keyboard/mouse/monitor, instead you will be running it headless. □ If the WiFi you will be using has a captive portal, or other restrictions beyond a simple SSID/password combination then you will need to install the full Raspberry Pi OS (not Lite) and connect your Pi to a keyboard/monitor/mouse to configure the WiFi.īefore you write the image, you will need to configure a few things such as the WiFi details that the Pi will use to connect. Run the imager, select the Raspberry Pi OS Lite OS, and select your SD card. You can download the imager from the Raspberry Pi downloads page. To install Raspberry Pi OS on an SD Card, you will need to use the Raspberry Pi imager. □ Raspberry Pi OS is a variant of Debian Linux The Lite version is preferred as you won’t need the desktop, and it installs and boots faster. You will need to install either Raspberry Pi OS (which contains a full desktop environment), or Raspberry Pi OS Lite. □ It is recommended to use a clean OS to ensure you don’t get errors caused by software issues Raspberry Pi’s use SD cards for their file system, so before you can use a Pi you will need to flash the Raspberry Pi OS onto an SD Card. ⏱ This will take a while, but most of it is hands-off time waiting for SD cards to be imaged or updates to be installed, so it can be done concurrently with the other goals in this workshop. ![]() The goal here is to set up your Raspberry Pi ready to use as an IoT device. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |